Posts Tagged ‘twin-screw’

Multiphase pump installation allowing wells to come back to production

Wednesday, November 15th, 2017 von admin

Crosbys Creek Oil & Gas  LLC, based in Ridgeland, MS,  is an independent American producer producing in Choctow County in Northern Alabama, USA. These fields are older and have produced oil and gas for many years.  Over time the natural reservoir pressure has dropped off to a point where some wells are not able anymore to overcome the back pressure generated by the surface flow lines and the first stage separator of the process facility. The company had heard about multiphase pumping. This economic alternative caught the interest of the management as the production was expected to remain interesting for years to come.

(more…)

Wangen: New hygienic twin screw pump

Thursday, October 19th, 2017 von admin

This new pump generation offers a spindle change without re-synchronisation of the spindle shafts. All you have to do is remove the housing and loosen the screws and the spindles can then be removed in order to replace the seal in a fast and straightforward manner, for example. Thanks to a self-centring flange casing, which is available as an option, the coupling is optimally aligned automatically. As a result, renewed alignment of the coupling with the pump, e.g. after service activities, is not required. In addition, the Twin guarantees a long service life, among other things, as a result of the further-developed, high-quality components and materials, such as the further-developed shafts.

(more…)

JEC: New hygenic twin screw pumps

Wednesday, August 30th, 2017 von admin

JEC LTD, leading sanitary pumps manufacturer in R.O.Korea, launched the JRZS Series of twin screw pumps gifted by extensively accumulated experience for hygienic pumping. These pumps are offering

  • a one-piece screw case with with larger radius corners and
  • a very compacted front loaded self-balanced mechanical shaft sealing system and
  • a fully drainable front cover design.

(more…)

Fristam adds double-screw technology to its pump portfolio

Thursday, May 12th, 2016 von admin

FDS_mit_FoerderschraubenThe pump casing of Fristam FDS pumps comes in three parts, consisting of an intermediate flange, the screw casing and the pump cover. This enables individual adaptation of the connections to any conceivable production system requirement. Thanks to central positioning of the gearwheels inside the bearing support area, the entire pump comes in a very compact design. Moreover, its massive shaft has reinforcements in the area of critical diameters to ensure maximum rigidity. Further stability is achieved through a combination of particular large bearings and an increased bearing distance. The result is smooth running with minimal wear.

(more…)

Blackmer: Global Release of S Series Screw Pumps

Friday, January 8th, 2016 von admin

Blackmer_S-SeriesS Series are self-priming double-ended positive displacement pumps available with or without external timing gears and bearings. Twin and triple screw designs provide complete axial balancing of the rotating screws and their timing technologies eliminate metal-to-metal contact with the pump.

S Series pumps are Atex-certified for use in explosive or dangerous environments, and have been specifically designed to address the difficult pumping challenges found in the oil & gas, process and marine industries. S Series pumps provide solutions that can meet the toughest application challenges regardless of temperature, viscosity or pressure.

(more…)

Maag: Screw pumps for most demanding applications

Friday, August 14th, 2015 von admin

F Screw Pump (2)Maag presents a new S Series of screw pumps that offer the process industries a variety of options for conveying challenging fluids. These rotary positive-displacement pumps provide numerous advantages over conventional technologies including

  • Atex-certified for use in explosive or dangerous environments.
  • Self priming capability, good suction performance
  • Excellent speed/output linearity
  • Low pulsation
  • Constant flow even at considerably different pressures and volumes
  • Compact footprint and ease of maintenance.

(more…)

Wangen Pumpen partners with Flowtrend, USA

Monday, February 2nd, 2015 von admin

Wangen Pumpen, German manufacturer of high quality progressing cavity pumps and hygienic twin screw pumps has partnered in distribution with Flowtrend Inc., USA, an ISO 9001 certified manufacturer of high-quality fluid handling. Flowtrend Inc. will distribute the state-of-the-art hygienic twin screw pump within the United States and Canada. The hygienic twin screw pump adds to Flowtrend’s already extensive line of products that cover the food, beverage, and pharmaceutical industries. Wangen Pumpen serves this distribution channel to penetrate new markets and develop their international presence.

(more…)

ITT Bornemann: Twin-Screw-Pump receives EHEDG EL Aseptic Certificate

Monday, September 22nd, 2014 von admin

slh_4g_big_cyan_kleinSingle-flow hygienic Twin-Screw-Pumps, type SLH from ITT Bornemann, have been successfully installed in many applications in the food-, beverage and pharmaceutical industry for many years. It is one of the main functions to pump high viscous fluids. Because of the high rotational speed range (up to 3600 rpm) it is also possible for the pump to handle low viscous products with a high flow velocity. So it is possible to use the SLH Twin-Screw-Pumps also for the CIP-Process.

To reach the high criteria of hygienic design ITT Bornemann designs the pump inside and outside in best way without loss of functionality. As a result the pump is EHEDG EL class 1 certified and also 3-A registered. Now the SLH-4G Twin-Screw-Pump reaches the next level: EHEDG EL Aseptic Certificate. The certificate underlines the hygienic design of SLH-4G Twin-Screw-Pump and confirms the possibility to operate in aseptic applications.

(more…)