Posts Tagged ‘Bauer’

Top 10 posts on Δ p Global Online in September 2018

Monday, October 1st, 2018 von admin

The actual Top 10 posts on Δ p GLOBAL Online:

  1. Circor/Allweiler: Pumps help excavate world’s longest tunnel
  2. Lutz: Compressed air motors for drum pumps
  3. Grundfos half year result: Continued strong sales growth and strategic progress
  4. Crane/Depa: New Line of Cast Stainless Steel Air Operated Diaphragm Pumps
  5. Sulzer is optimizing pump reliability and performance
  6. Flotronic: Sanitary AODD designed to meet exacting standards
  7. Netzsch: Multiphase pumps for oil-water-sand-gas mixtures
  8. Wilden: 4 Reasons to choose AODD pumps for chemical processes
  9. Grisworld: Affinity Law RPM
  10. Mouvex opened its Americas facility in Grand Terrace, CA

The actual Top 10 posts on  Δ p Online in German:

(more…)

Top 10 posts on Δ p Global Online in January 2018

Thursday, February 1st, 2018 von admin

The actual Top 10 posts on Δ p GLOBAL Online:

  1. Richter Chemie‐Technik is welcoming Barbara Wladarz as Managing Director
  2. Predicting Performance Curves of Centrifugal Pumps In the Absence of OEM data
  3. Endress+Hauser opens of a modern office building in Santiago
  4. Sulzer doubles capacity of high voltage testing to improve repair times
  5. Packo/Daniatech: Pumping and Mixing with a Minimum of Energy Consumption
  6. Wilden Donates New AODD Pump To Mercy Ships
  7. Wilo: Green pumps for a green stadium
  8. TB Woods: Couplings in Pump Applications
  9. BauerGear: Efficiency comparison pumping system
  10. Mouvex: State-Of-The-Art Winery Embraces Innovative Technology

The actual Top 10 posts on  Δ p Online in German:

(more…)

Efficiency comparison pumping system

Thursday, January 25th, 2018 von admin

An increasing number of pumps are now being run using speed control in order to be able to define the dynamic volume flow. The pump’s quadratic characteristic causes the motor load to decrease rapidly at lower speeds, which results in the level of efficiency decreasing significantly. Using the diagrams, it can be seen that the ideal workload for the existing asynchronous motor is not reached, due to operation at partial loads (approx. 30%) and speeds (75%).

If the pump is then equipped with a PMSM motor that has an extended efficiency range including partial load operation, the level of efficiency can be increased by approx. 12% in this example and savings of more than EUR 250 per pump per year can be achieved (depending on the number of hours‘ operation per year).

(more…)