The MW500 frequency inverter with decentralised design has been developed for space-saving solutions, such as directly motor mounted or adjacent to the motor on the wall. As a result, the need for lengthy cables and switch cabinets is eliminated. MW500 is robust with an IP66 protection rating. It can withstand high overloading of 150% for 60 seconds every 10 minutes, and operate in temperatures up to 40°C (wall installation) and 50°C (motor installation). With increased ruggedness compared to alternative technologies, it provides reliable operation over a long service life. The inverter is designed to operate asynchronous motors in the power range 0.75 to 7.5 kW, and is offered as three variants for a mains voltage of 380 to 400V (A: 1.1 to 1.5 kW, B: 2.2 – 4 kW and C: 5.5 – 7.5 kW), and for 200 to 240V, as variant A (0.75 to 1.1 kW). It is ideal for many pump applications.
The drive is also easy to maintain. Three LEDs on the top of the inverter indicate the state (ready, alarm and fault) of the motor so users can identify at quick glance the performance of the equipment. Furthermore, an optional line disconnector can be fitted for simple and safe maintenance.
“Engineers are increasingly specifying variable speed drives to control their motors and make energy savings, however, many are limited in where they have to position the drive,” says Marek Lukaszczyk, European Marketing Manager at WEG. “With the MWV500 engineers now have a flexible variable speed drive that can be set up exactly where required.”
The drive is available with a built-in analogue potentiometer to regulate the speed of an asynchronous motor without the need for a control panel. However, users can use the device simply and intuitively from an optionally integrated control panel (HMI), which is also available with remote control. The standard version of the MW500 has a PID process controller and an integrated PLC with numerous programming functions. An EMC filter conforming to EN 61800-3 is integrated in the device and category C2 and C3 variants are optional.
The decentralised inverter is based on the same successful device platform as WEG’s CFW500 frequency inverter. The MW500 is able to detect and enable simple, plug-and-play add-on components, and to guarantee maximum flexibility, digital inputs, outputs and communication protocols such as CANopen, DeviceNet and Profibus-DP are available as expansion modules. In addition, a mobile memory card, the Mcard, enables process data to be transferred easily from one device to another. The expansion modules and compatibility with frequency inverters in the CFW family (CFW500, CFW700 and CFW11) enable one device to address many different applications. As such, users require less stock and so save on both space and storage costs.
The Windows-based SuperdriveG2 application software for the programming, control and monitoring of the MW500 is available to download on the WEG website for free.