Posts Tagged ‘vertical’

KSB extended portfolio with vertical turbine pumps

Tuesday, October 23rd, 2018 von admin

The KSB Group extended its portfolio by adding a comprehensive programme of vertical turbine pumps. The so-called B Pumps are multistage vertical turbine pumps with a submerged hydraulic system. The pump sets comprise a discharge casing assembly, a column pipe and a pump bowl assembly. In total, customers can choose from 17 sizes with three different impeller types.

  • The pump sets cover heads of up to 200 metres.
  • Flow rates of up to 720 l/sec.
  • Available with one to 25 stages,
  • with stage casing diameters ranging from six to 24 inches.

(more…)

Water intake pumps to China’s mega-refinery

Wednesday, July 25th, 2018 von admin

Over the past decades, international technology Group Andritz has become a byword for highest quality and customized pump solutions and is now a preferred partner on a global scale. In the interests of its customers, the Pumps division does not set itself any limits with regard to size and flow rate in the development and manufacturing of tailor-made pumps. Thus, Andritz has been commissioned to supply the water intake pumps for China’s first privately managed and largest petrochemical plant.

(more…)

Suspended pumps with hydraulic system of standardised chemical pumps

Friday, May 18th, 2018 von admin

The Estigia type series extends KSB product portfolio for the chemical and petrochemical industries and other applications. It will be showcased at Achema 2018 trade fair in Frankfurt.

The low-pressure suspended pumps are designed for vertical wet installation in a closed tank under atmospheric pressure. For the installation depth, various lengths ranging from a minimum of 852 mm to a maximum of 6402 mm are available and three discharge pipe diameters can be selected for each pump size.

(more…)

Innovations for wastewater pumping

Friday, March 2nd, 2018 von admin

Fig. 1

At the previous Ifat, Swiss company Egger presented a further development of their completely retracted Turo centrifugal impeller TA for raw sewage conveyance. To date, a large number of pumping stations that are burdened with high solid loads (such as fibrous materials, wet wipes, etc.) have been successfully equipped with them. Blockages could be eliminated or – under extreme load – reduced to a minimum.

At Ifat 2018, the company is now presenting a low-clog and 100% dry-running-safe centrifugal pump hydraulic system. A further development of the Eurodyn hydrodynamic shaft seal in conjunction with Turo Vortex hydraulics makes absolutely dry-run safe use possible. The pump hydraulics and shaft seal operate completely contact-free. In the case of wastewater pumping operations that comply with the regulations, the pump set as designed by Egger enables 4-years of maintenance-free operation.

(more…)

Sundyne: New low NPSHr, high-flow pump

Thursday, January 14th, 2016 von admin

sundyneThe Sundyne LMV-803Lr is an API 610 compliant pump available in either OH3 or OH5 motor mounting configuration that provides ultra-low NPSHr performance – approximately 5 ft (1.5 m), across the entire performance range – for flows to 800 GPM (180 m³ / hr) and heads to 1,000 ft (305 m).

The ultra-low NPSHr allows the pump to be installed at grade level, eliminating the expense of installation in a pit and performing maintenance in a confined space. The vertical design is ideal for use in refineries, NGL, petrochemical and chemical plants, as well as handling light hydrocarbon handling services, such as bottom pumps for de-ethanizers.

(more…)