Posts Tagged ‘heat transfer fluid’

Heat transfer oil circulation pump acc. to DIN EN 733

Saturday, December 9th, 2017 von admin

Fig.1 The new NKX heat transfer oil circulation pump

The pump manufacturer Dickow has developed a new pump line NKX for circulation of thermal oil. The pump casing is designed for 16 bar and 350 °C. The new pump line extends the application limit of the previous NKLs-type. The new NKX will replace the series NKLs with exactly the same dimensions in future.

The NKX is used as a circulation pump for hot oils in industrial heating plants/units. The performance range covers capacities up to 400 m3/h and differential heads up to 90 m in 50 Hz services; and capacities up to 2,500 US-gpm and differential heads up to 400 ft in 60 Hz services. The dimensions and performance range of these centrifugal pumps are according to DIN EN 733, that means range is subdivided into different pump sizes in order to achieve best efficiency for all service conditions inside the envelope.

(more…)

SPX Flow: Pumps for transfer of hot oil and hot water

Tuesday, July 26th, 2016 von admin
hotwater cut away close up

Hot water version

The new CombiTherm Plus pump provides transfer of hot fluids without the need for additional, external cooling systems. The pump is available in two configurations suitable for the pumping of hot oil or hot water and provides an highly efficient and pumping solution. The air-cooled CombiTherm Plus pump provides transfer of hot oil or hot water in a wide range of applications including

  • injection molding,
  • chemical processing,
  • asphalt / bitumen and tar processing,
  • deep frying systems,
  • steam generators,
  • fuel heaters and
  • heat recovery systems.

The pump keeps fluid temperatures uniform to ensure processes are efficient while its design protects seal faces and bearings from the heat of the fluid; ensuring durable, low maintenance, long life operation.

(more…)

KSB: New heat transfer fluid pump in in-line design

Monday, June 16th, 2014 von admin

131202_Etaline-SYT_01 (2)Yet another addition has been made to KSB’s comprehensive range of heat transfer fluid pumps: In April the Frankenthal-based pump manufacturers introduced their new Etaline SYT series. The single-stage volute casing pumps are designed with suction and discharge nozzles on the same axis, which is also referred to as in-line design. The piping layout for such pump sets can be kept very simple, so they are an ideal choice for compact heating systems and confined spaces.  The pumps cater for

  • a maximum flow rate of 316 m³/h and
  • heads of up to 69 m.

Etaline SYT pumps handle hot water as well as mineral and synthetic thermal oils at temperatures of up to 350 degrees Celsius. Robust in design, the new pumps are particularly suited to the rough conditions experienced in heat transfer systems.

(more…)