Posts Tagged ‘gear pump’

Gather: From laboratory to production via pilot plant

Tuesday, April 4th, 2017 von admin

A process generally undergoes initial development within a laboratory and is then made production ready in pilot or mini plants. During this scale-up, a range of different problems can emerge, e.g., in the way temperatures behave. In a laboratory, a process may be endothermic but becomes exothermic in production. How pumps behave in relation to peripheral equipment can change under full-scale production conditions, Sven Borghoff describes a coordinated pump and drive concept which makes scaling up easier.

Dosing pumps with multifunctional extensions for different pump types often used in laboratories generally have no particularly high temperature or pumping ranges. However, when scaling up, these aspects take on major significance. Gather uses its magnetic-driven pumps (Fig. 1) here. They are available in such a broad range that when scaling up from the laboratory to production via a mini or pilot plant, the pumping and control technology can be retained. The company cooperates with the chemical industry, institutes and universities to make process development from initial laboratory trials through to production easier.

(more…)

EnviroGear: 3”, 4” and 6” Metal Sealed Internal Gear Pumps

Monday, July 4th, 2016 von admin

EnviroGear_G-Series_lineThe G Series models 3”, 4” and 6” metal sealed internal gear pumps are available in cast iron, carbon steel and stainless steel materials. Delivering flow rates up to 500 gpm, these pumps are offered with both packing and mechanical seal options and can be used for a wide range of application types. The EnviroGear G Series sealed internal gear pumps are durable and an excellent cost-effective choice for your challenging liquid transfer needs.

(more…)

Maag: Gear pumps for chemical process industry

Tuesday, August 25th, 2015 von admin

The Swiss pump manufacturer offers a broad range of different gear pumps, predominantly for the chemical process industry. This include the following models:

(more…)

Maag Pump Systems: New gear pumps with up to 50% higher performance

Thursday, October 17th, 2013 von admin

With the launch of its 6th generation gear pumps, to be first unveiled at the K’2013 show, Maag redesigned every single component featured in its pump portfolio, from gears and shafts through to bearings and seals, fine-tuning how all components interact, culminating in a system with a new industry-leading price/performance ratio.

(more…)