Posts Tagged ‘flow rate’

Jumo: New Magnetic Inductive Flowmeter

Wednesday, November 25th, 2015 von admin

Jumo1Jumo, specialist for temperature and pressure measurement technology as well as for liquid analysis, introduced the magnetic inductive flowmeters Flowtrans Mag S01 and Mag H01.

  • The Mag S01 is available for nominal widths ranging from DN 10 to DN 300.
  • The Mag H01 with nominal widths of DN 3 to DN 100 was especially developed for hygienic applications.

For both versions, the conductivity of the measurement medium must be at least 5 µS/cm; the maximum temperature lies at 130°C, depending on the version. Both flowmeters are available either as a compact device or with a separate transmitter.

(more…)

Grundfos: Direct Sensors – the sense organs of the pump

Saturday, August 22nd, 2015 von admin

grundfos DirectYou can only change what is accessible by measurement – whoever wants to control a process flow of a pump needs reliable current data on the one hand, and on the other, possible intelligent linking and interpretation of this data: Sensors deliver data, microchips have stored software to interpret this and actuators implement the commands. To also offer technical benchmarks, the pump manufacturer Grundfos maintains well-equipped own research and development departments, finance and personnel dealing with motors, frequency converters, sensors, microchips and their programming.

The ‘Direct Sensor’ development is a micro-mechanical semiconductor sensor (MEMS, Micro-Electro-Mechanical System), which is produced in its own wafer fabrication facility of purity grade 10.

(more…)

Endress+Hauser inaugurates new US Customer Center

Thursday, September 11th, 2014 von admin

Endress_Hauser_USA_2 (2)Endress+Hauser inaugurates a new 80,000 square feet state-of-the-art Customer Center in Greenwood, Indiana. This 16 million dollar investment in infrastructure helps to optimize customer support and further underscores Endress+Hauser’s commitment to the US market and its loyal customers in the Americas.

(more…)

Biotech pump for process chromatography

Friday, November 9th, 2012 von admin

Quattroflow with Bio-Rad2

A key component in process chromatography systems is a Quattroflow QF-150 Series Biotech Pump. QF-150 pumps are ideal for this application because they offer unique capabilities to the system and contribute toward an ideal solution for the chromatography purification process. Important fluid-transfer needs are met through the QF-150’s controlled low-pulsation flow for stable process control, low-shear operation for delicate product and media handling, and high turn-up/down capability for scaleability.

(more…)

Seal-less Triplex pump

Tuesday, July 3rd, 2012 von admin

The new ‘T’ Series  of seal-less high pressure diaphragm pumps developed by Wanner extends the company’s unique Hydra-Cell pump concept into higher flow and pressure capacities, where it will compete directly with conventional triplex piston plunger pumps in applications up to 170 l/min and 310 bar.

(more…)

Siemens at Achema: World’s most compact Coriolis flow solution

Friday, June 1st, 2012 von admin

The new generation of Coriolis flow measurement technology from Siemens Industry Automation Division is the most compact solution in the market. The digitally based flow solution Sitrans FC430 with short build-in-length is suitable for any liquid or gas application within the process industry. The new device is capable of optimizing a wide range of processes for increased productivity in industries like Chemical and Pharmaceutical. Sitrans FC430 is ideal for multi-parameter measurement and can be used in applications like fast filling, batch control, blending and dosing as well as for measurement of gases or fluids.

(more…)

Caprari: Pumping water at high flow rates

Tuesday, February 14th, 2012 von admin

A long-term strategic alliance has been established between Caprari and Peme Gourdin, two European manufacturers specialized in water centrifugal pumps. With this alliance Caprari presents the new High Flow Line, a range of products and solutions designed for pumping water at high flow rates, now available world-wide through the Caprari network.

(more…)

KSB at IFAT: Solids separation system

Friday, February 10th, 2012 von admin

At this year’s IFAT in Munich, KSB will present an innovative solids separation system allowing highly efficient waste water disposal in pumped drainage applications. New AmaDS³ is a combination of

  • a patented, dry-installed solids separation system and
  • two waste water pumps in back pull-out design.

(more…)

Automatic recirculation valve

Thursday, February 2nd, 2012 von admin

The SSV, a special automatic recirculation valve, automatically protects centrifugal pumps – especially boiler feed water pumps – against wear and damage, as can occur if the pump runs dry or during low-load operation. Typical damages are for example a temperature increase, which can lead to partial evaporation of the medium, or recirculation in the impeller. It can also lead to flow separation and cavitation in the pump. Similarly, increased vibration and mechanical stresses occur in the pump and cause damage. The SSV bypass control valve opens as soon as the process flow demand falls to the same level as the minimum flow required by the pump. In this way, the specified minimum continuous flow required by the pump is maintained, even if there is zero process flow demand.
(more…)

High-pressure twin-screw pumps for food and beverage

Thursday, February 2nd, 2012 von admin

In many areas of the food and beverages industry there is a distinct trend towards the use of pumps that are able to reliably manage higher pressure differentials. This trend is due not only to the higher friction losses caused by longer pipelines and increasing flow rates in the production plants but also to the pumping of generally higher-viscosity media that enable savings in terms of energy to heat the media.

(more…)