Posts Tagged ‘energy-efficiency’

KSB motors IE5 classified

Wednesday, March 22nd, 2017 von admin

The KSB SuPremE motor made by the Frankenthal pump manufacturer KSB has been IE5 classified since January 2017. The motor meets the requirements of IE5 (IEC/TS 60034-30-2), the highest of energy efficiency classes for variable speed electric motors; compared with IE4, motor losses are reduced by a further 20 percent.

Unlike conventional synchronous motors this drive is made without any magnetic materials such as rare earths that are categorised as critical raw materials since their extraction causes severe environmental impacts in their countries of origin.

(more…)

KSB: New high-efficiency circulators for OEMs

Monday, January 23rd, 2017 von admin

The high-efficiency circulator range Calio SI type series are intended for use in heating, air-conditioning and solar power systems where they facilitate automatic operation with constant-pressure or proportional-pressure control as well as operation with 0-10 V setpoint input or external control via PWM signal in accordance with VDMA-Einheitsblatt [Standard Sheet].

On the HMI, Dual and EcoMatch variants the user can select the required mode of operation via two pushbuttons on the control panel.

(more…)

Alfa Laval: New hygienic self-priming pump with improved energy efficiency

Friday, November 13th, 2015 von admin

Alfa_Laval_LKH_Prime_Pump_Press_releaseThe superior efficiency of the LKH Prime results in reduced energy consumption. This delivers low cost of owner-ship. Designed for CIP duties containing entrained air, it can also pump product, potentially reducing the capital investment when designing process systems.

Quiet in operation, the LKH Prime is engineered to meet the most stringent standards and hygienic requirements of the food, dairy, beverage, and home & personal care industries. The pump is also going to be available as an UltraPure model, meeting the needs of pharmaceutical customers.

(more…)

Sulzer launches a new Process Pump Range

Friday, November 13th, 2015 von admin

sulzer1The new SNS end suction single stage process pump range is designed to exceed “the highest standards of performance and reliability, and also the design requirements of the ISO5199 standard. For the pump users this means substantial savings in total life-cycle costs and a reduced environmental footprint.”
The new pump range was developed for pumping applications in the

  • pulp and paper,
  • water and wastewater,
  • chemical processing,
  • power,
  • oil and gas,
  • hydrocarbon processing, and
  • general industries.

(more…)

Hapag Lloyd chooses electronic pump control from Colfax

Wednesday, April 8th, 2015 von admin

Hapag Lloyd will equip ships of the 13,200-TEU Hamburg Express class and other vessels with the CM-1000® pump control system. The CM-1000 system controls the flow rates of seawater cooling pumps based on the temperature of the fresh water and the current need for coolant. As a result, the amount of seawater pumped into the seawater cooler matches requirements, saving electrical power on board the ship.

(more…)

Allweiler: Two years ahead of EU energy efficiency requirement

Thursday, December 18th, 2014 von admin

Allweiler pumps will meet the Ecodesign Directive ErP 2005/32/EC energy efficiency directive beginning January 1, 2015 – two years ahead of required compliance.

(more…)

WEG: New frequency inverter for decentralised motor and wall installation

Wednesday, November 26th, 2014 von admin

WEG2110_Bild1The MW500 frequency inverter with decentralised design has been developed for space-saving solutions, such as directly motor mounted or adjacent to the motor on the wall. As a result, the need for lengthy cables and switch cabinets is eliminated. MW500 is robust with an IP66 protection rating. It can withstand high overloading of 150% for 60 seconds every 10 minutes, and operate in temperatures up to 40°C (wall installation) and 50°C (motor installation). With increased ruggedness compared to alternative technologies, it provides reliable operation over a long service life. The inverter is designed to operate asynchronous motors in the power range 0.75 to 7.5 kW, and is offered as three variants for a mains voltage of 380 to 400V (A: 1.1 to 1.5 kW, B: 2.2 – 4 kW and C: 5.5 – 7.5 kW), and for 200 to 240V, as variant A (0.75 to 1.1 kW). It is ideal for many pump applications.

(more…)

ABB: Standard drive now available in IP55 as well

Wednesday, November 26th, 2014 von admin
The IP55 drive

The IP55 drive

The ACS580 is ABB’s all-compatible general purpose drive. Through drive selection, set up, operation and maintenance, the ACS580 turns complicated to simple to control processes efficiently. The ACS580 power range is 0.75 to 250 kW and voltage range is 208 to 480 V.

The wall-mounted drive is available with IP21 enclosure and from now on the drives with IP55 enclosure for harsh environments are available as well.

(more…)

Colfax: Pump Monitoring for Intelligent Sea Water Cooling

Friday, September 12th, 2014 von admin

cm-1000 (2)The pump monitoring system CM-1000 Series is now available with a new active valve control functionality. This option delivers energy savings of potentially up to 85 percent. It also reduces maintenance by up to 50 percent and provides safer operation, short term return-on-investment and long term savings for total ownership.

(more…)

Sulzer showed optimized solutions at Ifat

Friday, May 9th, 2014 von admin

The Sulzer product portfolio for the water and wastewater business consists of

  • submersible sewage pumps,
  • submersible mixers and flow boosters,
  • turbocompressors as well as
  • pump control systems.

(more…)