Posts Tagged ‘condition monitoring’

KSB puts pumps into the Internet of Things

Thursday, March 15th, 2018 von admin

At this year’s Achema, KSB is presenting a new pump monitoring system called KSB Guard. Networked vibration and temperature sensors fitted directly to the pump make availability at plant level transparent. The system ensures that changes in the operating behaviour of the machine are detected at an early stage, and maintenance work can be better planned, without having to be on site with the pump. Unlike previous systems, KSB Guard is ideally suited for retrofitting. The sensor unit is attached to the bearing bracket or the drive lantern of the pump using a magnet and adhesive, and can be mounted during operation, with no need for changes to the machine. A battery unit, which is also supplied, provides self-sufficient power supply.

(more…)

Innovations for wastewater pumping

Friday, March 2nd, 2018 von admin

Fig. 1

At the previous Ifat, Swiss company Egger presented a further development of their completely retracted Turo centrifugal impeller TA for raw sewage conveyance. To date, a large number of pumping stations that are burdened with high solid loads (such as fibrous materials, wet wipes, etc.) have been successfully equipped with them. Blockages could be eliminated or – under extreme load – reduced to a minimum.

At Ifat 2018, the company is now presenting a low-clog and 100% dry-running-safe centrifugal pump hydraulic system. A further development of the Eurodyn hydrodynamic shaft seal in conjunction with Turo Vortex hydraulics makes absolutely dry-run safe use possible. The pump hydraulics and shaft seal operate completely contact-free. In the case of wastewater pumping operations that comply with the regulations, the pump set as designed by Egger enables 4-years of maintenance-free operation.

(more…)

Monitor your pump online – at any time, at any place

Friday, December 8th, 2017 von admin

Fig. 1

The generation of maintainers who check the condition of pumps on a daily basis by listening and touching the equipment is dying out. Nevertheless, pumps must operate reliably. To solve this problem, BestSens has developed the Bearing Monitoring System, BeMoS for short (Figure 1).

BeMoS monitors roller bearings in machinery and plants from the very first second of operation. What is so special about it is the underlying technology:

(more…)

Colfax/Allweiler: Intelligent pump monitoring

Monday, February 9th, 2015 von admin

!cid_BC04ED4BA47951C436EB@TENNCOMSINAIN-1000 is a platform, developed specifically for Allweiler pumps that are used in operationally-critical and environmentally-sensitive applications. IN-1000 improves safety while reducing operating costs. The core of the system is a software program developed by Allweiler.
The new Smart Platform can be used in straightforward condition monitoring to complex monitoring activities. This includes operational monitoring of several pumps for simultaneous fulfillment of safety and operating-cost requirements. Examples include monitoring of pressure, temperature, leaks, and vibrations. The system may also be expanded with standard industrial sensors.
(more…)

Colfax: Pump Monitoring for Intelligent Sea Water Cooling

Friday, September 12th, 2014 von admin

cm-1000 (2)The pump monitoring system CM-1000 Series is now available with a new active valve control functionality. This option delivers energy savings of potentially up to 85 percent. It also reduces maintenance by up to 50 percent and provides safer operation, short term return-on-investment and long term savings for total ownership.

(more…)

Prüftechnik: Wireless vibration analysis

Monday, March 31st, 2014 von admin

Power stationVibconnect RF is a condition monitoring system for large facilities with many standard machines like pumps. Even if there is no line-of-sight between the base station and the sensor units, the wireless signals are transmitted error-free. A new firmware update elevates this wireless online condition monitoring system to a higher plane. With its wireless technology, it fits for applications, which require the wireless transfer of vibration measurement data over long distances. The new firmware update includes several powerful new features:

  • Sending status and alarm emails,
  • supporting Modbus TCP,
  • reducing data overload,
  • live visualization of measurement data and
  • providing a 24V sensor unit version.

The new features are supported by the current version of the proven Omnitrend software.

(more…)