Posts Tagged ‘circulator’

KSB: New in-line pumps for building services

Wednesday, October 26th, 2016 von admin

Etaline LThe new Etaline L are small close-coupled pumps in in-line design. They are available in 12 hydraulic sizes with motors from 0.12 to 3.0 kW. The pump series covers flow rates of up to 95 m³/h and discharge heads of up to 21 metres.

The cast casings and the mechanical seals are designed for operating pressures of up to 10 bar. The connections at the suction nozzle and discharge nozzle can be either flanged or threaded, depending on the size. A confined O-ring reliably seals the casing, also in fluctuating operating conditions.

(more…)

KSB: New drinking water circulators

Monday, February 15th, 2016 von admin

160127_CalioTherm_0033The new high-efficiency circulators of the Calio-Therm S NC series are maintenance-free glandless pumps designed for pumping drinking water in closed circuits, which are commonly found in single-family or two-family houses as well as in larger building projects.
Like the other Calio pumps the new circulators offer a high-efficiency permanent magnet motor to achieve top efficiencies. With one-touch operation the flow rate can be adjusted via three speed levels. In the event of a blocked rotor the motor stops automatically, and a fault is indicated. Three LEDs display the operating status. The screwed connections are available in dimension Rp ½ internal thread (EN 10266) or G 1 ¼ external thread (DIN ISO 228). The maximum flow rate equals 0.7 m³/h. The pump’s maximum head is 1.0 m. The drinking water temperature should measure between +5 °C and +65 °C.

(more…)