Posts Tagged ‘Almatec’

Almatec: AODD Series Now Available in Stainless Steel

Friday, October 27th, 2017 von admin

The Futur S/SH pump series is now available in 316 stainless steel with high surface finish for the transfer of pure solvents in the semiconductor industry.

Realizing the importance of reliable and contamination-free pump performance in critical semiconductor operations, Futur S/SH Series pumps are cleaned several times, then assembled and tested in a cleanroom line before being released for delivery. Futur S/SH Series pumps incorporate a “straight-through flow pattern” with only one wetted housing part (center housing) while the air control system and the air chambers are located in the side housings.

(more…)

Almatec: Sanitary AODD pumps

Monday, August 7th, 2017 von admin

The Biocor pumps have been specifically designed for critical sterile applications, and meet the strict standards, regulations and operational requirements that govern the food and beverage industry because they contain no horizontal areas. Available with a 316L polished stainless steel wetted path, these pumps provide superior containment and utilize ball-lifting magnets that can be attached to the pump housing from the outside at the location of the four ball valves. With the use of magnets, the ball valves can be lifted from their seats, allowing the pump to be drained entirely without needing to be disassembled or removed from the application. This enables clean-in-place (CIP) and sanitize-in-place (SIP) capabilities.

(more…)

Top 10 posts on Δ p Global Online in July 2016

Monday, August 1st, 2016 von admin

The actual Top 10 posts on Δ p GLOBAL Online:

  1. KSB: New efficient high-pressure pump
  2. Daurex: An evolution of progressing cavity pumps
  3. Neptune: New Metering Pump
  4. Almatec: High-Pressure Pump Series  
  5. Sulzer launched a Retrofit App
  6. Flowserve: Seal Failure Analysis App
  7. Sulzer introduces new lifting stations
  8. EnviroGear: 3”, 4” and 6” Metal Sealed Internal Gear Pumps
  9. KSB opimized mechanical seal for waste water pumps
  10. Sundyne: API 685 Sealless Pumps     

Here the actual Top 10 on  Δ p Online in German

(more…)

Almatec: High-Pressure Pump Series

Monday, July 4th, 2016 von admin

Almatec-AHD_AHS SeriesThis new high-pressure pump series AHD/AHS are developed for applications up to 15 bar (218 psig) such as filter press applications.

The “D” in AHD stands for Duplex, which means the reinforcement of the drive pressure is more than 2:1 by the internal pressure boosting stage. This is achieved thanks to a maximum drive pressure of 7 bar (100 psig), which allows the AHD to build up discharge pressures up to 15 bar (218 psig). AHD Series pumps are available in three sizes (AHD 15, 25 and 40) with maximum capacities of 4, 10 and 20 m3/h (17, 44 and 87 gpm).

The new AHS Series, which does not include an internal pressure booster, features an extremely rugged housing making it suitable for higher discharge pressures. The “S” in AHS stands from Simplex, meaning the drive pressure is transferred to the medium in a ration of 1:1.

(more…)

Top 10 posts on Δ p Global Online in March 2016

Thursday, March 31st, 2016 von admin

The actual Top 10 posts on Δ p GLOBAL Online:

  1. KSB: New drinking water circulators
  2. Almatec: AODD Pumps receive 1935/2004/EC certification
  3. Wilden: Pure-Fuse diaphragms for hygienic applications
  4. Grundfos: Strong result in 2015
  5. Oerlikon Leybold: High vacuum system for researchers
  6. Sulzer: Large-Scale Process Pump for Metsä Fibre in Finland
  7. KSB: New impeller combines reliability and efficiency
  8. International Rotating Equipment Conference 2016
  9. HNPM: Compact dispense module for analytical instrumentation 
  10. PCM: Manufacturer of progressing cavity pumps launched new web site

Here the actual Top 10 on  Δ p Online in German

(more…)

Almatec: AODD Pumps receive 1935/2004/EC certification

Monday, February 22nd, 2016 von admin

Almatec, manufacturer of sanitary air-operated double-diaphragm (AODD) pumps, is pleased to announce that its plastic and metal AODD pumps are now 1935/2004/EC-compliant.

1935/2004/EC is the common name for European Commission Regulation No. 1935/2004, which is the European safety standard for materials that come into contact with food during the production process. With this certification, Almatec AODD pumps are now available for use in a wide variety of sanitary and hygienic applications that involve food contact.

(more…)

Top 10 posts on Δ p Global Online in July 2015

Saturday, August 1st, 2015 von admin

The actual Top 10 posts on Δ p GLOBAL Online:

  1. GEA acquirers Hilge from Grundfos
  2. Abel: Focused on Mining
  3. EagleBurgmann: Flange Integrity Management
  4. PVPC Expo Middle East 2015 – Abu Dhabi
  5. Lewa: New Triplex process diaphragm pump
  6. Kirloskar Brothers Ltd. exhibit at Achema 2015
  7. KBL: New process pump
  8. Crane Celebrates 160 Years
  9. KSB: Mobile app brings Industry 4.0 to all pumps
  10. Almatec: Flexible choice of product connections

Here the actual Top 10 on the German  Δ p Online

(more…)

Top 10 posts on Δ p Global Online in June 2015

Wednesday, July 1st, 2015 von admin

The actual Top 10 posts on Δ p GLOBAL Online:

  1. Lewa: Safe pumping of sour crude oil
  2. Almatec: Flexible choice of product connections
  3. KSB: Mobile app brings Industry 4.0 to all pumps
  4. KSB: New canned motor pumps
  5. Lewa: New subsidiary in Russia
  6. Kirloskar Brothers Ltd. exhibit at Achema 2015
  7. Dickow delivers 200.000st pump to Eastman Chemical
  8. Abel: Hydraulic Triplex Diaphragm Pumps at Achema
  9. KBL: New canned motor pump series
  10. BBA: Emergency pump units for nuclear power plant

Here the actual Top 10 on the German  Δ p Online

(more…)

Almatec: Flexible choice of product connections

Monday, April 20th, 2015 von admin

Almatec_CXM_BildThe new Almatec air-operated diaphragm pump series CXM – shown at Achema 2015 –  consists of four sizes and can be equipped with seven different product connections. This is possible thanks to the modular design of the pumps. For each pump of the sizes 20, 50 and 130 two center blocks are available with different connection types and sizes.

This wide range of product connections allows a precise adjustment of the pump to the specific application. This is reinforced by the alternative choice between a ball and cylinder valve system, which can also be converted to each other. Ball valves are ideal for liquids containing particles, cylinder valves for superior suction lift.

(more…)

Top 10 posts on Δ p Global Online in February 2015

Sunday, March 1st, 2015 von admin

The actual Top 10 on Δ p GLOBAL Online:

  1. Wangen Pumpen partners with Flowtrend, USA
  2. Colfax/Allweiler: Intelligent pump monitoring
  3. BBA: Environmentally friendly high flow pump unit
  4. Kirloskar: New wastewater pump series
  5. Endress+Hauser succeeds in the market
  6. Neptune: Metering pumps in irrigation systems
  7. Fristam: Efficient pumping for media containing gas
  8. Wilden: 76 mm (3”) Full-Stroke Integral Piston Diaphragm
  9. Atlas Copco Pumps: New Product Marketing and R&D Managers
  10. Hermetic: New canned motor pump series for the chemical industry

Here the actual Top 10 on the German  Δ p Online

(more…)