CP: New magnetic drive centrifugal pump up to 750 m³/h

cpThe Swiss pump manufacturer CP Pumpen AG has put a new pump size on the market. The new magnetic drive pump, MKP 250-200-315, enhances the MKP series. These pumps are – according a company’s information – “considered high-performance, energy-efficient, sturdy and very safe – regardless of which medium is pumped. CP’s development team was able to implement all of these product properties in the new MKP 250-200-315.”

“The demand for pumps with a large flow volume had increased in the past. With a volume of up to 750 m3/h, the new MKP is complementing our series with a size that is important for the market”, says Heinz Mathys, Marketing & Sales Director and member of the CP Management Team.

The new centre support remains form-stable up to 350 °C. “Using cutting-edge methods, CP’s experts were able to design pump feet, which ensure that the heat stays in the pump. This, in turn, ensures less loss when heating the medium, ” so the CP information. The titanium shroud allows as low eddy-current loss as possible, which results in a higher level of efficiency. Moreover, the new pump does not need any plain bearing pedestal and as a result can be evenly heated. This means that customers can use the MKP 250-200-315 as well to convey challenging media, such as liquid sulphur.

CP’s sealless magnetic drive pumps (MKP, MKP-S and MKTP), developed for the high demands of the chemical and associated industries have a single, centrally arranged impeller bearing assembly which is ideally lubricated and cooled with the pumped liquid. Therefore, also solids-laden and low-boiling liquids can be transported. The pumps are compact and with virtually no dead areas. The modular system facilitates assembly and lowers the costs for spare parts, maintenance and service to a minimum.

www.cp-pumps.com

Tags: , , ,