Archive for 2014

Wilden: Stainless steel AODD pump for higher corrosion resistance

Friday, December 19th, 2014 von admin

Wilden_Advanced-FIT_PS830-SSThe new Wilden air-operated double-diaphragm (AODD) pump series 430 and 830 Advanced FIT is produced of 316 stainless steel for higher corrosion resistance in aggressive chemical applications. These sieries have been specifically designed to be direct replacements for existing Wilden 38 mm (1-1/2”) and 51 mm (2”) Advanced pump installations.

“FIT” means

  • bolt-to-bolt and
  • pipe-to-pipe

(more…)

Allweiler: Two years ahead of EU energy efficiency requirement

Thursday, December 18th, 2014 von admin

Allweiler pumps will meet the Ecodesign Directive ErP 2005/32/EC energy efficiency directive beginning January 1, 2015 – two years ahead of required compliance.

(more…)

Lewa: Hermetically tight 170 °C high-temperature pumps for production

Wednesday, December 17th, 2014 von admin

Wacker_freiIn the existing chemical installation in a Wacker Chemie plant, the safety-related design of the relevant pump systems had to be thoroughly renovated. One of the basic requirements for the redesign was that diaphragm pumps themselves had to remain absolutely hermetically tight, even at high working temperatures of +170 °C during normal operations and brief peaks as high as +200 °C. As a result, Lewa developed an individual solution to meet the specific customer requirements.

“As an additional security measure, the pressure-free hydraulic reservoir behind the diaphragm is blanketed with nitrogen as a protective gas”, explains Lewa project lead Rainer Sonnenfroh.

(more…)

Top 10 posts on Δ p Global Online in November 2014

Monday, December 1st, 2014 von admin

The actual Top 10 on Δ p GLOBAL Online:

  1. Schroeder: Automatic recirculation valve
  2. ITT Bornemann: Hermetically sealed twin- screw pump with magnetic coupling
  3. Argal: Pumps made of fiberglass
  4. Chromacon and Lewa sign licensing agreement
  5. Netzsch: 2014 Global Product Leadership Award
  6. Almatec: AODD pumps increase safety and flexibility
  7. WEG: New permanent-magnet motor surpasses IE4 standard
  8. KSB: Pump Operation Check as a new service
  9. Wilo: High-pressure centrifugal pump with IE4 motor technology
  10. Rheinhütte: 85 pumps for fertiliser plant in Saudi Arabia

Here the actual Top 10 on Δ p Online

(more…)

Wilden: Air Distribution System now in Stainless Steel & Plastic

Thursday, November 27th, 2014 von admin

Wilden_SHIFT-SS-PLSThe Pro-Flo Shift Air Distribution System (ADS) for Wilden air-operated double-diaphragm (AODD) pumps is now available in

  • 316 stainless steel and
  • polypropylene plastic materials of construction,
  • joining the original aluminum and nickel-plated aluminum offerings.

The introduction of the stainless steel and plastic options allows Wilden AODD pumps to be offered for a greater number of applications, including

  • sanitary (food & beverage, personal care products and pharmaceuticals),
  • hazardous chemicals and
  • corrosive environments.

(more…)

KBL: Makes a global footprint in Women Talent Management

Wednesday, November 26th, 2014 von admin

Kirloskar Brothers Limited (KBL) has been recognized yet again at an international forum. The latest recognition comes for its all-women plant in Coimbatore. KBL’s Coimbatore plant has received the Best Employer Brand Award towards Women Talent Management at the fifth Asia Employer Brand Awards 2014 held in Singapore.  The award consists of two categories, namely

  • ‘Best Talent Management’ and
  • ‘Initiative for Community Awareness’.

(more…)

WEG: New frequency inverter for decentralised motor and wall installation

Wednesday, November 26th, 2014 von admin

WEG2110_Bild1The MW500 frequency inverter with decentralised design has been developed for space-saving solutions, such as directly motor mounted or adjacent to the motor on the wall. As a result, the need for lengthy cables and switch cabinets is eliminated. MW500 is robust with an IP66 protection rating. It can withstand high overloading of 150% for 60 seconds every 10 minutes, and operate in temperatures up to 40°C (wall installation) and 50°C (motor installation). With increased ruggedness compared to alternative technologies, it provides reliable operation over a long service life. The inverter is designed to operate asynchronous motors in the power range 0.75 to 7.5 kW, and is offered as three variants for a mains voltage of 380 to 400V (A: 1.1 to 1.5 kW, B: 2.2 – 4 kW and C: 5.5 – 7.5 kW), and for 200 to 240V, as variant A (0.75 to 1.1 kW). It is ideal for many pump applications.

(more…)

ABB: Standard drive now available in IP55 as well

Wednesday, November 26th, 2014 von admin
The IP55 drive

The IP55 drive

The ACS580 is ABB’s all-compatible general purpose drive. Through drive selection, set up, operation and maintenance, the ACS580 turns complicated to simple to control processes efficiently. The ACS580 power range is 0.75 to 250 kW and voltage range is 208 to 480 V.

The wall-mounted drive is available with IP21 enclosure and from now on the drives with IP55 enclosure for harsh environments are available as well.

(more…)

Hermetic: New canned motor pump series for the chemical industry

Friday, November 21st, 2014 von admin

CNF40-160Hermetic-Pumpen has developed a comprehensive product series with which the company can satisfy practically all its customers’ requests but with shorter lead times. The ranges of canned motor pumps provide the basis for individually configurable pumps that, thanks to the huge number of possible combinations of the individual modules, are available in around 700,000,000 variations.

(more…)

Oerlikon Leybold Vacuum: Major Order for High-Performance Cryo Pumps

Thursday, November 20th, 2014 von admin
Coolvac

Coolvac

The order of a Chinese company includes the manufacturing of a batch of cryogenic vacuum pumps of the series Coolvac for the evacuation of space simulation chambers. These pumps with a flange diameter of 1.3 m anr pumping at rate of 60,000 litres per second for nitrogen. Cryo pumps are used wherever very large vacuum chambers need to be evacuated very rapidly to extremely low pressures, offering high pumping rates and an attainable vacuum of down to 10-12 mbar.

(more…)