Mechanical Seal Primary Rings for Sealing Refrigerants and Low Viscosity Liquids
Low viscosity liquids are difficult for mechanical seals because the hydrodynamic film that they create between the two rubbing seal faces is extremely thin. In order for this extremely thin hydrodynamic film to lubricate the two sealing faces, the seal faces must stay highly polished and they must run in very close proximity to each other. The self-polishing characteristic of mechanical seals with antimony impregnated, carbon-graphite primary rings and solid silicon carbide counter face rings can solve this problem. Low viscosity liquids such as Freon refrigerants, liquid oxygen, liquid carbon dioxide, propane, ethylene, and acetone are now being successfully sealed using mechanical seals with Metcar Grade M-444, antimony impregnated, carbon-graphite primary seal rings.
It is the self-polishing characteristic of the M-444, antimony impregnated, carbon-graphite material and the high dimensional stability of both solid silicon carbide and antimony impregnated carbon-graphite that enables these two materials to run in the required close proximity.
- KSB opimized mechanical seal for waste water pumps
- Carbon-graphite components for pumps
- EagleBurgmann: Seal concept for light vaporous media
- EagleBurgmann: New mechanical seal for chemical pumps
- KSB: New cost-effective high-pressure pump series